Why "Old" Double Glazing is Dragging Down Your EPC Rating

Read our article here on why you should upgrade your old double glazing.

Your home’s Energy Performance Certificate (EPC) officially rates the building’s energy efficiency on a scale from A (most efficient) to G (least efficient).
A positive EPC rating is a highly effective way to make your home more comfortable. It can also offer other benefits, like making the place more appealing to potential buyers and increasing the overall market value.
Old windows are a major source of draughts and can make a property inefficient. Modern, well-fitted double glazing can significantly improve your EPC rating, particularly when you’re upgrading from older windows.
Below, we look at the impact of having old double glazing and why you should consider upgrading.

Does New Double Glazing Improve Your EPC Rating?

Yes, but usually only by a few points and not a whole band. Windows are one of the many things that are assessed by an energy assessor and recorded. This is alongside insulation, heating and hot water. Replacing windows on their own rarely moves a home’s rating from D to C.
It also depends on what you are replacing. If you are replacing single glazing for modern A-rated double glazing, then you are going to see a noticeable difference. Swapping old double-glazed windows for newer ones, the difference is going to be smaller. Knight Frank’s analysis of 30,000 homes found window upgrades were most common in the lowest-rated F and G homes, where they had the most to gain.
New windows still earn their place when you are upgrading the efficiency of your property. They cut heat loss and condensation, and they count towards any bigger upgrades for EPC that you plan for your property. The rest of this guide explains how they contribute, and what that is worth.

The Difference Between Old Windows and Today’s Standards

The biggest divide is 2002. Since then, replacing windows in England and Wales has fallen under building regulations, which set stricter standards for the quality of installations. This set a minimum energy performance standard for new windows. Many units fitted before that date had no such requirement.

Older double glazing typically has:

  • Smaller air gaps of 6mm between the two glass panels, narrower than the usual 16mm of modern units.
  • Plain air gaps, instead of dense gases like argon or krypton.
  • No low-emissivity (Low-E) coating to reflect heat into the room.
  • Poorer U-values, ranging from 2.7 to 3.0 W/m2K, compared to the 1.2 to 1.4 W/m2K of modern windows.
  • Bulkier frames, which can negatively affect your home’s aesthetics.
Today, a window can’t just be a double-glazed frame; it must meet strict whole-window thermal thresholds and achieve low U-values.
New double-glazed windows must comply with numerous regulations, including Part L thermal performance, designed to reduce property energy demands, cut carbon emissions and minimise heat loss, all of which will directly impact your home’s EPC rating.

Book a Free Home Visit

Homeglaze have been a trusted home improvement specialist since 2011. Our ethos is no nonsense pricing with absolutely no pressure to buy.
We offer a free quote and then a home visit to discuss your home improvement project. If you need any design inspiration or would like to see our products up close, then visit our showroom.

How Are EPC Ratings Calculated?

Your home’s Energy Performance Certificate (EPC) rating is calculated based on how much energy your property uses per square metre and how much it loses, using the government’s Standard Assessment Procedure (SAP). This government formula considers your home’s insulation, heating, windows, lighting, and renewable energy.
The final score is measured on a scale of 1 to 100, with 100 meaning your home generates almost zero net energy costs. According to the Office for National Statistics, homes in England had a median EPC score of 68.
This score is then converted into an EPC band, as shown in the following spreadsheet:
Band SAP Score Range Efficiency Level
A 92 to 100 Outstanding
B 81 to 91 Very Efficient
C 69 to 80 Above Average/Good
D 55 to 68 Average
E 39 to 54 Below Average/Inefficient
F 21 to 38 Poor / Very Inefficient
G 1 to 20 Least Efficient
Therefore, the average home in England sits in band D. However, older, inefficient windows can negatively affect your EPC rating for many reasons.

Family Owned, Family Run Home Improvements Company

Here at Homeglaze we’re a local double glazing installer in Chigwell, Essex. We have been a trusted home improvement specialist since 2011.
We offer Windows, Doors, Conservatories, Conservatory Roof Replacements, Porches & More. Get in touch with our team now for a free quote.

Common Issues With Old Double Glazed Windows

After all, everything has a lifespan. Windows are no exception, with an average lifespan of 15 to 25 years before they start to degrade.
A common issue with old double-glazed windows is a blown or failed perimeter seal. This happens when the edge seal degrades from UV and weather exposure, letting in outside air and moisture, causing misting, cloudiness, and droplets between the two panes of glass that won’t wipe away.
You may also notice whistling sounds in high windows, cold draughts around the window’s perimeter or, in extreme cases, rainwater leaking through. Over time, the external rubber and weather gaskets in your windows can dry out, harden, shrink back and crack, no longer protecting your home from the cold outside air.
For more insight into common issues we’ve seen with old double-glazed windows and signs it’s time to replace them, take a look at our guide to 5 signs of double-glazing failure. Putting up with old, inefficient windows can make your home less comfortable or less attractive, but can also affect your monthly bills.

The Financial Impact of Your EPC Rating on Energy Bills and Property Value

Your EPC rating will strongly correlate with both your home’s running costs and its market value.
Based on English Housing Survey figures, A- to C- rated homes can cost around £90 a month in energy bills on average, whereas a band D property could rise to £130. Less efficient properties in band G could cost around £222. While individual tariffs and habits vary, the takeaway is important. A home with a poor EPC rating could cost you more money yearly.
Homeowners are more aware of energy consumption, and buyers are more likely to pay attention to an EPC rating in their decision-making, with outdated, failing, blown double glazing leading to lower offers. In fact, according to the Mortgage Advice Bureau, around 71% of homebuyers consider a home’s EPC rating an important factor in their decision to buy, with many prepared to pay more for a home with a good EPC rating.

Key Features of Modern Double Glazing

Modern double glazing combines advanced engineering and strength, and the right windows improve your home’s comfort and its security, while complementing its character.

Key features of modern double-glazed windows include:

  • Improved home security through multi-point locking systems, toughened glass and reinforced frames,
  • Enhanced energy efficiency thanks to increased insulating capacities,
  • Low-E coatings to reflect internal heat into the living space in winter and block solar heat gain in summer,
  • Noise reduction,
  • Increased property value.

How Does Double and Triple Glazing Compare?

Double and triple-glazed windows use the same glass; however, they differ in their construction.
Double glazing is a sealed unit with two panes of glass. Triple glazing has three panes. The main difference is performance and efficiency.
Both are excellent options for your home, creating a strong thermal barrier and creating a consistent, comfortable temperature.
Triple glazing will cost more than double glazing, yet the third pane adds an extra air gap to make your home more efficient, whereas if you are more concerned about noise reduction, double glazing could be a better option.
While triple glazing can dampen noise, the middle pane can sometimes increase sound vibrations.

Installing New Double Glazing (FENSA, Building Regs, certificate for the EPC)

Proper window installation is important to ensure your windows perform at their best, protect your home, lower your energy bills and keep your building structurally sound. Even the highest-quality windows will fail to perform when fitted incorrectly.
FENSA (Fenestration Self-Assessment Scheme) is a government-authorised scheme to assure the competence of window and door installers in the UK.
Working with a FENSA-registered installer means that your windows are installed to high standards. FENSA installers are regularly inspected and audited to ensure their work meets the required standards. This allows them to self-certify their work without involving local authorities for an inspection. This streamlines the window installation process and allows you to enjoy your new windows sooner. You can trust that your installer meets all the necessary industry standards.
Here at Homeglaze, we are proud to be a FENSA-certified installer. We complete our window installations to an extremely high standard and take pride in everything we do.
To discuss your new double-glazed windows, call our friendly team on 020 8502 7560 to learn more about our services, or use our online contact form here.
Keep up with all of our news and give us a follow on Instagram and Facebook.